Nexenta Community FC Emulex - Driver attach failed
Added by Slawomir Czynski 10 months ago
[WARNINGS] link-id not found - b.1936
Hello,
Who can help ?
I want to connect the Sun 2540 FC Array to the Nexenta Community Edition 3.1.3 but Nexenta did not see my FC HBA adapter. Into log there is message "emlxs: [ID 349649 kern.info] [ B.1936]emlxs0: ERROR: 101: Driver attach failed. (Unsupported adapter found. Id:18 Device id:0xfc10 SSDID:0xfc11 Model:LP11000-S)"
Regards Slawek
Replies
RE: Nexenta Community FC Emulex - Driver attach failed - Added by Dan McDonald 10 months ago
Please utter: "prtconf -vp | grep -i 10df". That way I can see if the device is on the Illumos community's radar.
RE: Nexenta Community FC Emulex - Driver attach failed - Added by Slawomir Czynski 10 months ago
Thanks for reply. The printout for "prtconf -vp | grep -i 10df" is:
compatible: 'pci10df,fc10.10df.fc11.1' + 'pci10df,fc10.10df.fc11' + 'pci10df,fc11' + 'pci10df,fc10.1' + 'pci10df,fc10' + 'pciclass,0c0400' + 'pciclass,0c04' subsystem-vendor-id: 000010df vendor-id: 000010df name: 'pci10df,fc11'
RE: Nexenta Community FC Emulex - Driver attach failed - Added by Dan McDonald 10 months ago
'pci10df,fc10' appears in /etc/driver_aliases on my Illumos box and in my NS3.1.x VM, so the device should be supported.
I'm curious about the link-id, but I'm not an FC expert.